Wetsuit boots are necessary for people who enjoy various water-based sports in colder climates. People in warmer climates also wear wetsuit boots but there are also various alternatives for them. Additionally, wetsuit boots they use are generally not as thick as wetsuit boots worn by people in colder climates. Wetsuit shoes are generally worn when participating in water sports such as surfing, windsurfing, kiteboarding, paddle boarding, etc.
The main purpose they surf is to keep your feet worm since they are going to be exposed to cold water while you participate in these activities. Their purpose is similar to a wetsuit and together they form the main part of every surfer’s equipment. They are not designed with appearance in mind and it is vital to understand that wetsuit boots need to be chosen carefully to accommodate the climate you are based in. Everyone needs to stay aware of the fact that choosing boots that are too thin in a cold climate can lead to injuries and serious health conditions.
Finding high-quality advice on choosing the best wetsuit shoes for you and your environment is very scarce and you can spend a lot of time online before finding useful information. That is why we are going to find which boots to consider and some general advice on different types, brands, and protection.
Best Men’s Wetsuit Boots
|O'Neill Wetsuits Mens 4/3 mm Psychotech Split Toe Boot||$$|
|Rip Curl Flash Bomb Hidden Split Toe Wetsuit||$$|
|O’Neill Wetsuits Superfreak Tropical 2 mm Split Toe Boot||$|
|NeoSport Wetsuits Premium Neoprene 3mm Hi Top Zipper Boot||$|
|O’Neill Wetsuits Mens Reactor Reef 2mm Boot||$|
|Hyperflex Wetsuits Men’s 7mm Amp Round Toe Boot||$$|
|Rip Curl Reefer Boot 1.5mm Toe Boots||$$|
|O’Neill Wetsuits Psychofreak 3.5 mm Split Toe Boot||$$|
Best Women’s Wetsuit Boots
|NP Surf Mission Low Cut Round Toe 3mm Wetsuit Water Boot||$$|
|NeoSport Wetsuits Premium Neoprene 3mm Low Top Pull On Boot||$|
|O’Neill Wetsuits Womens MOD Split Toe Boot||$|
Best Children’s Wetsuit Boots
|O’Neill Wetsuits Youth Reactor Reef Boot||$|
There is no difference between the sizing chart of wetsuit boots and other types of footwear. Sizes come in sizes such as 6, 7, 8, etc. However casual and sports shoes manufacturers generally offer shoes that come in half sizes. This cannot be applied to wetsuit boots manufacturers since they generally don’t provide half sizes. There are some exceptions but you should keep this in mind since it can be harder to find the perfect fit when you are limited to full sizes only. Apart from this, sizing charts can differ from manufacturer to manufacturer since they are not obliged to make their boots exactly the same. This means the same size from two wetsuit boots manufacturer can differ in size greatly. Always check online to see sizes in centimeters and check what customers are saying about the fit.
When it comes to the right fit, it’s important to state that finding the perfect fit for your wetsuit boots can be much more difficult than finding the right fit for other types of shoes since you have to consider the fact that you are going to undertake some adrenalin-filled activities where your performance can depend on the quality of your equipment. Additionally, you have to know that using boots that contain a tiny gab between the top of your fingers and the top part of your boots means you feet are going to get wet and that gap is soon to be filled by water. Water will restrain your movement and decrease your performance since your feet will feel heavier. On the other hand, avoid buying shoes that are too tight since there is a layer of rubber around the boot which can cause discomfort if it presses your foot too strong.
Neoprene is a type of synthetic rubber produced by polymerization of chloroprene. What makes this material special is its resistance towards degradation. Additionally, its applications are very wide because of its good characteristics. It can tolerate extreme conditions such as extreme cold, heat, and it is waterproof.
Neoprene is used in most surf booties and its standard thickness is around 5 mm. It provides waterproof protection and it is used to keep your feet warm in cold water. However, if you live in a warm climate, you don’t have to use 5 mm thickness as the standard since you won’t need as much thermal protection and you can get away with 2-4 mm thickness of neoprene for your neoprene booties.
There are generally three different types of wetsuit boots and it can be hard to settle down for a specific model. Each one has its own pros and cons and they are suitable for different environments and budgets. Types of wetsuit boots include: round toe wetsuit boots, split toe wetsuit boots, and latex dipped wetsuit boots.
Round toe wetsuit boots are considered to be the most popular and they are worn by surfers all around the world. There is actually nothing specific to mention about this them since it looks similar to regular boots you wear casually. The rounded end is easy to produce which usually makes these shoes pretty cheap to buy. This is an advantage and that is what makes them popular among beginners and professionals alike.
These boots are generally worn by professional surfers. The audience for split toe wetsuit boots looks more serious since they offer better stability for competitive surfing. This occurs because your big toe is held firmly in place which prevents your foot from moving freely. This means a bigger part of the energy from the movement of your feet is transferred to the board and you will experience better control of your surfboard. However, they do possess a slight disadvantage. These surf booties are more difficult to keep warm and they are generally not recommended for very cold climates.
We have mentioned before how most wetsuit boots use neoprene as standard material. A standard boot consists of a layer of neoprene along with a layer of fabric on either side. However, there is a new variant of these shoes and the new material which has gained its popularity over the last couple of years is called latex dipped neoprene. Boots that implement this material are extremely useless and its users have reported that surfing and other sports activities seem like you are doing everything barefoot. This is an advantage and performance has been extremely improved. On the other hand, durability is an issue which has to be mentioned regarding this type of boots. They are not going to last for a long time and the general advice is to use them if you are okay with buying a new pair each year. Professional athletes with sponsors should seriously consider these shoes.
Your choice of neoprene thickness should greatly depend on the climate you are going to perform your water sports activities in. There are generally three different options available for you to choose from: 3 mm, 5 mm, and 7 mm. 3 mm thickness can be a bad idea for most climates since water is harder to heat than air. This means that, even in the summer when temperatures rise to 40°C, the water will need many days to warm up and you will still feel very cold with 3 mm thick boots. 5 mm thickness is the standard and you can’t go wrong with this choice unless you live in extremely cold or warm areas. 7mm neoprene booties are reserved for colder areas of the world, for example Scandinavia. It’s always better to opt for thicker boots since you probably won’t feel warm in either case, considering the fact you will focus on water sports where you are constantly refreshed.
The aim of this article was to provide general information about wetsuit boots and neoprene. Understanding what different boot types have to offer is vital in your choice since some boots are not exactly designed for amateurs, and others are quite favorable for beginners with smaller budgets and with durability in mind. Durability and performance are sort of reciprocal values and it is very hard to find the perfect balance. Boots that favor performance over durability will serve you well in competitive sports where you need to prove you are the best. However, they are not going to last for a long time since they are intentionally made thinner and lighter in order to opt for a better board feel and control.
Sizing and fitting for wetsuit boots should be considered more important while buying than any other type of footwear. Tight surf booties will cause a bad performance and potential feet damage whereas a larger fit will cause water to flood your feet and make your feet heavier and harder to control.
We have also provided numerous products for men, women, and children. We consider these products to be of high quality and worthy of your time and money. Descriptions include positive and negative aspects and we hope they will help you make up your mind while making your purchase!
These split toe boots belong to the family of O’Neill wetsuit boots which are very dedicated to providing the best performance possible. This model utilizes Technobutter 2 Neoprene which showcases improved performance over its competition. It is very stretchy and durable. These boots are lightweight and the same thing can be said for neoprene used. It is lighter, it absorbs less water and it can dry out quickly. Some of the technologies used for this model include External Fluid Seam Weld which serves the function of preventing water from entering the boot itself.
These wetsuit boots are intended for being used as surf booties and they offer a unique design where the big toe is split from other toes but the split itself is hidden. Standard neoprene is used with 3 mm thickness. This means these wetsuit boots are good for warmer climates where temperatures do not change drastically over time. The sole is made of rubber. Even though neoprene used is not that thick, manufacturers claim that these boots offer extra protection from water. Board feel and control are emphasized but at a price of losing some durability in the process.
Another item from O’Neill wetsuit boots on our list is a model which uses 2 mm fluid foam neoprene. These boots are also split toe and they offer better board feel than round toe boots. Forefoot also comes prepacked with adjustable strap which can be tightened or loosened however it suits you best. There are also drain holes located throughout the forefoot which serve the purpose of getting rid of water that accumulates while surfing. Neoprene used is thinner than we are used to but they are still usable for warm climates.
Let’s describe an awesome model of wetsuit boots which differs from other boots by its specific design which is high top with a zipper. High top boots often provide better water protection but they need to fit perfectly in order to provide the best performance possible. NeoSport Wetsuit boots can be used for a variety of sports, including kayaking, diving, kiteboarding, etc. Neoprene used is 3 mm thick and they offer a balance between durability and performance. They are beginner friendly since the toe part is round. Warmth should not be an issue since there are many layers of protection available.
Let’s focus on one of many O’Neill wetsuit products we included in this list of top products. These wetsuit boots offer a round toe design with 2 mm neoprene thickness. On top of that, there is a 2 mm layer of Fluid Foam providing extra comfort and durability. They cannot be entirely described as boots since they are actually a slip-on pair of shoes and they are very low-cut. Its low-cut design means that neoprene protection of 2 mm simply might not cut it and you will probably have problems if you swim in colder climates.
Products we mentioned previously are very good for regular and warm climates. However, this model of Hyperflex Wetsuit Boots is finally a great choice for athletes who are all about thermal and water protection. The entire body is made off neoprene with a hydro rib sole with superb traction. They are high top with a Hyperflex Lockseal anti-flush closure which is sure to prevent water from entering and making your feet cold. They were firstly produced in 2010 and they have become quite popular with its audience, even though the price is not that affordable.
We are going to review another pair of low-cut boots which offer a very thin layer of neoprene protection. These boots can hardly do you any good if you are trying to undertake any kind of competitive sports but their use is very diverse if your prefer durability over performance. Heel strap can be easily adjusted to fit your foot width. There is no denying the fact that these boots come with more than a reasonable price and it is very important since they can last for a long time.
O’Neill is definitely the most common wetsuit manufacturer on our list of top products and they definitely earned that honor by constantly producing high-quality models which serve even the most experienced professionals. They utilize a 3.5 mm thick neoprene protection with and integrated arch support, capable of supporting your legs at all times. The toe is split deep and this offers a tremendous amount of control over your board, regardless of what sport you are into.
Another pair of round toe boots from NP Surf offer a simplistic design which is definitely aimed towards a female audience who wants to look spotless at all times, no matter what is the occasion. The only available color wave is a mix of black, gray, and blue and they certainly look nice enough. The sole is thicker than you would normally expect from wetsuit boots but it is not uncommon. Round toe design is very easy to get used to, but that makes them not so suitable for professionals trying to get every last bit of performance out of them.
There is nothing simpler or more enjoyable than simply pulling on your wetsuit boots and slipping into water in less than two seconds. This specific boot is suitable for a variety of different water-based sports; for example diving, paddle boarding, wakeboarding, kayaking and so on. The neoprene is 3mm thick which is a pretty average thickness suitable for all sorts of climates. The shoe itself is very durable and it offers a unique balance between warmth and flexibility which is extremely important for scuba divers.
Full black wetsuit boots manufactured by the most popular wetsuit boot manufacturer in the world, O’Neill. The closure is SuperSeal, offering better support and better protection from water trying to flood the shoe. FluidFlex Firewall is the type of neoprene that has been used for this model of wetsuit boots and its thickness stands at the average of 3 mm. They are pretty lightweight for a pair of wetsuit boots and they implement the split toe design which combined offers premium performance for a somewhat low price.
These children’s wetsuit boots come in three different color waves: black and gray, black and pink, and black and blue. This makes them suitable both for little girls and boys who would like to enjoy some water sports. There are two protective layers for this model: 2mm of Fluid Foam and 2mm of Neoprene Mesh. They feel very durable and sturdy but they don’t offer much warmth of water protection since their main purpose is to protect your feet from sharp and damaging objects. That is why the sole is a bit thicker than you would normally expect.